Principle of analysis of brittle-plastic rock mass

Based upon Il’yushin’s postulate and the plastic potential theory, a procedure for calculating the abrupt change in stresses from the peak strength surface to the residual strength surface is proposed. The stability criterion for a brittle-plastic body loaded proportionally is presented. Finally, three examples have been solved analytically and numerically, including an engineering example of the steep rock slope of a shiplock system for the Three Gorges hydroelectric power project in China.     

Nuclear radii of 17,19B and 14Be

The interaction cross sections (σ_I) of light radioactive nuclei close to the neutron drip line (^17,19B, ¹⁴Be) have been measured at around 800A MeV. The effective root-mean-square (r.m.s.) matter radii of these nuclei have been deduced from σ_I by two different methods, a Glauber-type calculation based on the optical limit approximation and a few-body reaction model. The deduced radii from both approaches agree with each other within experimental uncertainty. The r.m.s. radii of ¹⁷B (2.99±0.09 fm) and of ¹⁴Be (3.10±0.15 fm) in this work are consistent with the previously determined values, and have a higher accuracy. The r.m.s. radius of ¹⁹B (3.11±0.13 fm) was newly determined. Assuming a “core plus 2n” structure in ¹⁷B and ¹⁴Be, the mixing of ν(2s_1/2) and ν(1d_5/2) was studied and the s-wave spectroscopic factor is found to be 36±19% and 47±25%, respectively. A valence radius analysis suggests a “core plus 4n” structure in ¹⁹B.     

Observation of charge-ordering in particle production in hadronic Z0 decay

Analysis of the rapidity structure of charge correlations in hadronic events from Z⁰ decays gives evidence for chain-like charge-ordering of particle production along the thrust axis, as predicted by ‘QCD-motivated’ string-like fragmentation models.     

An optimized MP2RAGE sequence for studying both brain and cervical spinal cord in a single acquisition at 3T

Magnetization Prepared 2 Rapid Acquisition Gradient Echo (MP2RAGE) is a T₁ mapping technique that has been used broadly on brain and recently on cervical spinal cord (cSC).The growing interest for combined investigation of brain and SC in numerous pathologies of the central nervous system such as multiple sclerosis (MS), amyotrophic lateral sclerosis (ALS) and traumatic injuries, now brings about the need for optimization with regards to this specific investigation. This implies large spatial coverage with high spatial resolution and short acquisition time, high CNR and low B₁⁺ sensitivity, as well as high reproducibility and robust post-processing tools for T₁ quantification in different regions of brain and SC.In this work, a dedicated protocol (referred to as Pr-BSC) has been optimized for simultaneous brain and cSC T₁ MP2RAGE acquisition at 3T. After computer simulation optimization, the protocol was applied for in vivo validation experiments and compared to previously published state of the art protocols focusing on either the brain (Pr-B) or the cSC (Pr-SC). Reproducibility and in-ROI standard deviations were assessed on healthy volunteers in the perspective of future clinical use.The mean T₁ values, obtained by the Pr-BSC, in brain white, gray and deep gray matters were: (mean ± in-ROI SD) 792 ± 27 ms, 1339 ± 139 ms and 1136 ± 88 ms, respectively. In cSC, T₁ values for white matter corticospinal, posterior sensory, lateral sensory and rubro/reticulospinal tracts were 902 ± 41 ms, 920 ± 35 ms, 903 ± 46 ms, 891 ± 41 ms, respectively, and 954 ± 32 ms for anterior and intermediate gray matter. The Pr-BSC protocol showed excellent agreement with previously proposed Pr-B on brain and Pr-SC on cSC, with very high inter-scan reproducibility (coefficients of variation of 0.52 ± 0.36% and 1.12 ± 0.62% on brain and cSC, respectively).This optimized protocol covering both brain and cSC with a sub-millimetric isotropic spatial resolution in one acquisition of less than 8 min, opens up great perspectives for clinical applications focusing on degenerative tissue such as encountered in MS and ALS.     

环Z[X]不是中华环

设R是具有单位元1的交换环;A是R中的理想而a,b则是R中的任意元.定义a≡b(A)若Ra+A=Rb+A.称环R是中华环若a≡b(A+B),则存在c∈R使c≡a(A)及c≡b(B).环是中华环的充要条件是由K.Aubert与A.Beck二人于1980年找出的.显然,整数环Z必是中华环.Aubert与Beck二人亦证明了Z[x,y]不是中华环.但他们二人无法证明Z[X]是否中华环.本文用不同的手法处理,证明了Z[X]不可能是中华环.同时,我们进一步证明,对任意代数数a,环Z[a]均是中华环.因此,Aubert与Beck在1980年所提出的问题,在本文中得到圆满的解答.     

Selective separation of aromatic hydrocarbons through supported liquid membranes based on ionic liquids

Ionic liquids are emerging as alternative solvents for volatile organic compounds traditionally used in liquid–liquid extraction and liquid membrane separation. In this paper, we examine whether room-temperature ionic liquids as a membrane solution can be utilized for hydrocarbon separation by using a supported liquid membrane. Aromatic hydrocarbons, benzene, toluene and p-xylene were successfully transported through the membrane based on the ionic liquids. Although the permeation rates through the membrane based on the ionic liquids were less than those of water, the selectivity of aromatic hydrocarbons was greatly improved. The maximum selectivity to heptane was obtained using benzene in the aromatic permeation and 1-n-butyl-3-methylimidazolium hexafluorophosphate in the liquid membrane phase.     

Search for new massive particles in cosmic rays

In this paper, some unusual cosmic ray events are reviewed. They are the Yunnan event recorded in 1972 using a cloud chamber at Yunnan Cosmic Ray Station (YCRS) near Kunming, the south-west of China; the six exotic events (Kolar events) collected during 1965 to 1975 in the Kolar Gold Mine Field (KGF) in south India; and a double-core event obtained also in KGF in 1979 at a depth different from that where the other six were obtained. In addition, some interesting phenomena were also noticed: the abnormal upward muon flux observed by the MINI collaboration, and several intriguing signals seen in the proton detector in KGF. A careful kinematics analysis has shown that all these exotic events are likely to be related to a kind of heavy and slow-moving (i.e. with a Lorentz factor γ ≈ 2–5) particles produced from cosmic ray interactions. Besides, the rough flux estimates in these experiments seem to indicate that the event rate does not depend on the depth. Thus a natural hypothesis is that there is a heavy and neutral component in the cosmic rays which might be related with the long-sought weakly interacting massive particle (WIMP) - one of the most promising candidates of the dark matter of our Universe. Moreover, from the tracks seen in these events, there is also a signal of the possible existence of a kind of heavy and charged particles with a relatively long lifetime (say, longer than 10⁻⁹s) which might be the interacting products of the unknown cosmic ray particles mentioned above. We then turn to the question of how to search for these exotic particles in cosmic rays, and propose to build a dedicated magnetic spectrometer for identifying them.     

A mesoscale study of thermal expansion behaviors of epoxy resin and carbon fiber/epoxy unidirectional composites based on periodic temperature and displacement boundary conditions

The thermal expansion behaviors of neat epoxy resin and carbon fiber/epoxy unidirectional (UD) composites were experimentally and numerically studied in this paper. The dynamic mechanical analysis (DMA), thermogravimetric analysis (TG), differential scanning calorimetry (DSC) and thermal conductivity measurement were used to measure the thermo-mechanical properties of epoxy resin at different temperatures. The dilatometer was used to measure the thermal strains and linear CTEs of neat epoxy resin and UD composites. In addition, a mesoscale finite element model based on the periodic temperature and displacement boundary conditions was presented to analyze the thermal expansion behaviors of UD composites. The resin-voids representative volume element (RVE) was used to calculate the thermo-mechanical properties of several kinds of resin-voids mixed matrix. From the results it can be found that the glass transition temperature of epoxy resin, porosity and fiber orientation angle have significant effects on the thermal expansion behaviors of UD composites. The mesoscale finite element analyses (FEA) have obvious advantages than various existing analysis models by comparing their predictive results. The distributions of thermal displacement, thermal stress and thermal strain were extracted between the carbon fiber, resin-voids mixed matrix and their interface, and also between the front and back surfaces of the loading direction, to further investigate thermal expansion structure effects of UD composites. This paper revealed that the mesoscale FEA based on periodic temperature and displacement boundary conditions can be also used for thermal expansion researches of other complex structure composites.